Richmond Controls EZ-LITEä Kits for Fine N-Scale Zephyr:

NOTE: AS OF 2005, MODULES USE ONLY LEDs

Options 1 through 5 are directional -- ALL lights go off when the train is running in reverse.

1. Headlight + Red Tail Light: EZ13-011Z: $24

2. Headlight + Red Tail Light + Full Interior: EZ13-011Z+I: $60

3. Headlight + Red Tail Light + Mars Light (front): EZ04-021Z: $35

4. Headlight + Red Tail Light + Mars Light (front) + Interior: EZ04-021Z+I: $70

5. Headlight + Mars Light + Red Mars Tail Light + Interior: EZ04-021Z+I: $70

Options 6 & 7 are partly non-directional. The headlight is directional but the tail light and interior lights are non-directional.

6. Headlight + Red Tail Light: EZ22-011Z: $28

7. Headlight + Red Tail Light + Full Interior: EZ22-011Z+I: $64

Note: the headlight and front Mars Light are white LEDs. The tail light is accomplished using fiber optics driven by a red LED. Interior lights are distributed yellow LEDs. Non-directional tail lights and interiors can not be provided with Mars lights.

INSTALLATION requires the use of a #55 drill bit to create 0.052" holes for the LEDs, and a #65 drill bit to create a 0.035" hole for the tail light fiber optics. Richmond Controls can supply these drill bits for $2.00 each.

SHIPPING (for entire order, regardless of size): $6

All kits use the four circuit board traces already provided in the floors by Fine N-Scale to conduct power from the front of the train to the trailing cars. Two are used for motor power and two are used for lighting.

Other combinations are possible. If you don’t see what you want, please ask.

RICHMOND CONTROLS, P.O. BOX 1467, RICHMOND, TX 77406-1467

(281) 342-4895 www.richmondcontrols.com